How do I turn on the Eyrus Reader?

Eyrus Readers are shipped turned off.  Once you have a secure power source you can power up the Reader using the following steps:

  1. Plug in the twist lock plug to the 120 V AC power supply.
  2. Wait 30 seconds.
  3. Unplug the twist lock plug.
  4. Wait 30 seconds.
  5. Plug the twist lock plug into the AC power again, and leave it connected.

 Newer Reader models will have a power light to indicate the Reader is on.



Was this article helpful?
0 out of 0 found this helpful