Powering a Badge or a Beacon
- Both of these devices need to be powered on.
- This is a one-time action.
- Usually, this is done at the time a badge or beacon is being assigned and issued to a worker.
Powering a (BLE) Badge:
- Before your badge is ready for use, you need to power it on. -> This is a one time action.
- To power it on, you press and hold the button for 3 seconds. A red indicator light will blink a few times to let you know it's been successfully powered on.
- Once a badge has been turned on and assigned to a worker it is ready for use.
- Here is a quick clip of a badge being turned on:
Powering a (BLE) Beacon:
- Before installing your beacon, you need to power it on. -> This is a ONE time action.
- To power it on, you press the blue button for 3 seconds. A red indicator light will blink a few times to let you know it's been powered on.
- Below you will find a quick clip of a beacon being turned on.
- Once this is completed, you may install it to a clean surface of the hard hat.